NVA P20 Preamplifier


Both inputs are identical and hardwired to the selector switch using silver alloy cable with PTFE cover. The output of the switch is routed to the volume control with the same silver alloy cable. The volume control is a very high quality plastic film potentiometer. The signal is routed by using silver alloy cable. There is one set of output sockets for a power amplifier.

NVA P20 Specifications:

  • Controls - Volume and source select
  • Inputs - Two line level and direct
  • Output - One pair of 'pre-outs' for single amp support
  • Dimensions - w160mm x h50mm x d130mm

For turntable use you must use an NVA Phono1 or Phono2 external phono stage or equivalent. 

Not all Power Amplifiers are suitable for use with a Passive Pre-Amp and the manufacture should be contacted to assess suitability.

Warranty is for two years parts and labour and after that a further three years it will be repaired on a no profit / cost basis.

NVA P50 Preamplifier - Front

NVA P50 Preamplifier - Rear

'Review......'
ustomer